WallarGe Atomic Clock for Indoor Outdoor Temperature

Get Started Quickly with the Atomic Clock

1. Match the outdoor temperature link channel of the clock and outdoor sensor, such as A-A, B-B, C-C.
2. Install batteries (3xAAA for the clock and 2xAA for the outdoor sensor), and select your time zone.
3. The outdoor temperature will connect first, and once that's done, the clock will start searching for the WWVB signal.
4. Place the clock in a location with a good signal for better reception, and the outdoor sensor in a safe, outdoor location within 330 feet/100m.
5. The clock will automatically update the time when the signal is successfully received.

Tips: - In most areas, the signal can only be received at night. If your clock does not receive the WWVB signal during the day, wait until the next morning, and it will be set. - Outdoor temperature range: -40°F to 158°F (-40°C to 70°C). Indoor temperature range: 32°F to 122°F (0°C to 50°C). - The outdoor sensor should be placed within 300ft/100m and out of direct sunlight or rain.

Wall or Desk Clock - 12/24 Hour Mode: Standard Time (12Hr) and Military Time (24Hr) are switchable. Press and hold the TIME SET button to enter the setting. - AUTO DST: With AUTO DST on, the time will automatically change for daylight saving time. It can be turned off if not needed. - Alarm: The alarm can be turned on/off manually according to your needs, just click the button on the back of the clock. - Temperature Switching: Fahrenheit and Celsius are switchable, and the indoor and outdoor temperature will always display in the same mode.

After installing the batteries, if the outdoor temperature is not showing, select any one of the ABC channels on the clock and set the sensor channel to the same. The outdoor temperature will be displayed within 3 minutes.

The clock does not have a backlight feature, so it does not light up in the dark.

It supports 4 U.S. time zones: EST, CST, MST, and PST.

To correct the wrong day of the week, set the correct date and year, and the day of the week will be automatically corrected.

The outdoor sensor is waterproof, but for a longer service life, we recommend not exposing it to direct rain or sunlight.

Key Features: - Accurate Atomic Clock: The built-in receiver automatically synchronizes with the WWVB radio broadcast, updating the time accurately every midnight. - Atomic Clock with Indoor and Outdoor Temperature: Displays both indoor and outdoor temperatures, helping you better manage your daily life. - Digital Clock Battery Operated (No Backlight): The digital clock and outdoor sensor are battery-operated (3xAAA for the clock, 2xAA for the sensor). Low battery symbols will appear when the batteries are running low. - Digital Alarm Clock with AUTO DST: The alarm and DST settings can be turned on or off manually. With DST on, the clock will automatically adjust for daylight saving time. - Large Display with Temperature, Day, and Date: The clock shows the time with seconds in large, bold numbers, and also displays indoor/outdoor temperature, day, and date. - 12/24Hr Time Mode and Fahrenheit/Degree Switchable: The clock has two display modes (standard time and military time), and the temperature can be switched between Fahrenheit and Celsius.

product information: